NIBE F470

F470 is part of a new generation of heat pumps, which have been introduced to supply your home with inexpensive and environmentally friendly heating. Heat production is safe and economical with integrated hot water heater, immersion heater, circulation pump and control system.

The heat pump can be connected to an optional low temperature heat distribution system. e.g. radiators, convectors or under floor heating. It is also prepared for connection to several different products and accessories, e.g. extra water heater and climate systems with different temperatures.

F470 is equipped with a control computer for good comfort, good economy and safe operation. Clear information about status, operation time and all temperatures in the heat pump are shown on the large and easy to read
display. This means, for example, that external unit thermometers are not necessary.

Excellent properties for F470:

  • Integrated water heater
    There is a water heater integrated in the heat pump, which is insulated
    with environmentally friendly cellular plastic for minimal heat loss.
  • Scheduling the indoor comfort and hot water
    Heating and hot water as well as ventilation, can be scheduled for each
    day of the week or for longer periods (vacation).
  • Large display with user instructions
    The heat pump has a large display with easy-to-understand menus that
    facilitate setting a comfortable climate.
  • Simple troubleshooting
    In the event of a fault, the heat pump display shows what happened and
    the actions to be taken.
Image: Exhaust air heat pumps/Product range/NIBE F470

Docking options

NIBE F470 can be connected in several different ways, e.g. to solar panels, two or more heating systems, gas boiler, district heating and to an extra electric hot water heater.

Heat pump function

An exhaust air heat pump uses the heat that is in the building's ventilation air to heat up the accommodation. The conversion of the ventilation air's energy to accommodation heating occurs in three different circuits. From the outgoing ventilation air, free heating energy is retrieved from the accommodation and transported to the heat pump. In the refrigerant circuit, the heat pump increases the retrieved heat's low temperature to a high temperature. In the heating medium circuit, the heat is distributed around the house.

Image: Exhaust air heat pumps/Product range/NIBE F470
  1x230 V
Height 2100-2125 mm
Width 600 mm
Depth 615 mm
Net weight 203 kg
Water capacity, outer jacket 70 litres
Water capacity, cylinder 170 litres
Voltage 230 V (1-phase+N)
Refrigerant R290 (Propan)
Specified output, compressor 0,65 kW
Specified output, immersion heater * 10,25 kW
Corrosion protection Stainless

 

Savings/year ** 6500 - 9300 kWh/year 6500 - 9300 kWh/year

* Factory setting 8 kW

** Value varies, as it is dependent on the energy extracted and exhaust air volume flow.

 

Rights to make any design modifications are reserved.